alumina fiber meaning in Chinese
氧化铝纤维
Examples
- Effect of adding nanocrystalline - al2o3 on sintering behavior of alumina fibers
3纳米粉对高纯刚玉制品高温力学性能的影响 - Friction and wear properties of az91 magnesium alloy and its hybrid composites reinforced with alumina fiber and graphite particulates
石墨颗粒混杂增强复合材料的滑动摩擦磨损性能研究 - This paper expatiated on the developing history , the present research situation , the reinforced mechanism and the application prospect of the fcmc , and the paper also studied the technological parameter and influencing factors of fabricating alumina fiber - alumina composites
本文阐述了纤维增强陶瓷基复合材料的发展历史、研究现状、增强原理及其应用前景。研究了制备氧化铝纤维? ?氧化铝复合材料的工艺参数和影响因素。 - Taking the andalusite from south africa and alumina fiber as raw materials , adding aluminum sulphate as binder , fabrication and properties of alumina fiber reinforced andalusite composite was studied through wet dispersion , mould pressing and sintering processes
以红柱石和氧化铝纤维为原料，用硫酸铝作为结合剂，经过分散、混合、半干法成型、高温烧成工艺，对氧化铝纤维增强红柱石基复合材料的制备及性能进行了研究。 - When the alumina fiber accounted for 10 % , the density of the composites was chiefly high and the fiber evulsion effect was reinforced ; when the alumina fiber accounted for 30 % , the fiber evulsion effect , fracture and bridge - connection effect were mainly strengthened , when the fiber proportion was 50 % , at the temperature of 1500 c , the bending strength reached 26 . 11 mpa while the compressive strength was 79 . 30 mpa
氧化铝纤维含量为10和30的试样增强机理不同，含量为10时，复合材料以基质密实度高、纤维拔出效应增强为主；氧化铝纤维含量为30时，复合材料以纤维拔出、断裂、桥联效应增强为主。当纤维含量为50时，在1500下烧成，其抗折强度达到26 . 11mpa ，耐压强度达到79 . 30mpa ，该复合材料可用作轻质保温材料。